Halloween Flaming Pumpkins Side Windows Printed Perforated See-Thru Vinyl Decal - Fits 2&4 Door Jeep Wranglers 2007 - Present

JK - 2DR: 2007-2018

$89.99

1/4

Halloween Flaming Pumpkins Side Windows Printed Perforated See-Thru Vinyl Decal - Fits 2&4 Door Jeep Wranglers 2007 - Present

$89.99

Pattern JK - 2DR: 2007-2018 JKU - 4DR: 2007-2018 JL - 2DR: 2018+ JLU - 4DR: 2018+

Ignite the Halloween spirit with our Halloween Flaming Pumpkins Side Windows Printed Perforated See-Thru Vinyl Decal, designed specifically for Jeep Wrangler models from 2007 to the present. This striking decal features flaming pumpkins, perfect for adding a fiery and spooky touch to your vehicle during the Halloween season. Crafted from high-quality ORAJET 3675 50/50 Perforated 5.5mil PVC Vinyl, this decal not only enhances your Jeep's festive look but also provides practical benefits like privacy and UV protection.

Crafted from premium ORAJET 3675 perforated vinyl with eco solvent inks, these printed graphics combine vibrant color reproduction with the visibility advantage of 50% light transmission. The perforated design allows viewers to see through while displaying your full-color graphic—ideal for vehicle windows, storefronts, and displays. UV-resistant eco solvent inks ensure lasting color vibrancy in outdoor conditions. Self-adhesive backing with removable release liner enables professional installation on clean, flat surfaces.

Made from ORAJET 3675 perforated vinyl.
Printed with UV-resistant eco solvent inks.
50% light transmission for two-way visibility.
Self-adhesive backing with removable liner.
Water-resistant and UV-resistant.
Rated for long-term indoor and outdoor use.
Designed for clean, smooth, flat surfaces.
Made to order with quality control.

ORAJET 3675 perforated vinyl is ideal for window graphics, vehicle wraps, storefronts, and displays where visibility matters. Unlike solid vinyl, the perforated design lets light pass through—viewers see through the window while your full-color graphic displays from the outside. UV-resistant eco solvent inks deliver vibrant colors that resist fading in sunlight, rain, and temperature changes. Built for durability and professional appearance, these graphics maintain their bold look for years of reliable outdoor performance.

Required Tools:

Retractable razor blade, squeegee, tape measure or ruler, and a spray bottle filled with isopropyl alcohol or soapy water.

Optional:

For easier positioning, lightly mist both the application surface and adhesive side of the graphic with water. This reduces initial tack for more flexibility during placement, but increases drying time to 15-20 minutes.

Surface Preparation:

All surfaces must be clean and dry before application. Use glass cleaner on windows and automotive detergent on metal or painted surfaces. Wipe dry with a lint-free cloth to ensure proper adhesion.

Step 1: Position and Tape in Place

Align the graphic using a horizontal reference line. Use masking tape on the corners to hold it temporarily. Apply a strip of masking tape across the top edge to create a hinge.

Step 2: Remove the Release Liner

Carefully hinge the graphic upward. Slowly peel the release liner away from one corner, working gradually across until fully removed. Keep the graphic taut.

Step 3: Apply the Graphic

Using a squeegee, begin at the center and work outward with firm, smooth strokes. Apply even pressure to push out air and ensure adhesion. Go over the entire graphic once more to ensure full contact.

Step 4: Remove Masking Tape

Slowly remove the transfer tape by pulling it back flat against the surface. Watch carefully to ensure the vinyl stays properly adhered. Trim edges with a razor blade if needed.

Application Tip:

If small air bubbles appear, use an X-Acto knife tip to gently release trapped air and smooth the vinyl down.

Every graphic is custom-printed in the USA using commercial-grade digital printing equipment with eco-solvent inks for precise color accuracy and professional quality. Each print is hand-inspected to ensure vibrant colors, sharp detail, and perfect registration before shipping.

Because each graphic is custom-printed and individually inspected, please allow 3-10 business days for production before shipping. Once your order ships, tracking information will be sent automatically.

Complete your install kit